Online guide
From your first refuel to reading your check-engine codes — in 8 sections.
🚀 Start here
Car Control - OBD2 is first of all a digital car logbook. The OBD diagnostics features are optional — even without an adapter you can:
- Log refuels with the cheapest pump prices in your country (MIMIT, Roulez-Eco, Geoportal, Lux, UK CMA)
- Track maintenance, deadlines (road tax, insurance, inspection), documents, tyre sets
- Compute average fuel consumption, cost-per-km, year-end projections
- Record GPS trips and export them as PNG share-cards
The OBD adapter adds: check-engine code reading, live sensors (RPM, temperature, etc.), automatic VIN-based vehicle switching. But it's not required.
💡 If you're here only to log refuels and deadlines, you can skip the "OBD adapter" section entirely.
📱 Add your first vehicle
Always the first step.
- Open the app — you land on the Vehicles screen
- Tap + Add vehicle (FAB bottom-right)
- Enter make, model, fuel type, displacement. Everything else is optional.
Supported brands: nearly 100 with a model catalogue (Alfa Romeo, BMW, Citroën, Fiat, Ford, Mercedes, Peugeot, Renault, Volkswagen and more). You can also enter a custom make.
Multi-vehicle: save as many cars as you like. The chip in the top-right of every screen shows the active vehicle — tap it for a quick switcher.
⛽ Log refuels
The most important daily flow. What you need:
- Total amount paid
- Litres dispensed (or unit price)
- Odometer reading
Country tip: in Italy the app recognises the station from your GPS position and pre-fills the average regional price. You see your real saving against the regional benchmark.
First cost-per-km: about 2 weeks after your first refuel the app sends a one-shot notification with your first real cost-per-km figure. From then on, the analytics get accurate.
🔧 Maintenance and deadlines
Maintenance covers service stops, oil changes, brake pads, tyre swaps — anything. Set nextDueKm or nextDueDate and the app alerts you when you approach the threshold.
Deadlines — road tax, insurance, inspection, driving licence, registration. Each one has a cascade reminder: 60 → 30 → 7 → 1 day before, with escalating priority.
Seasonal tyres — on 15 October the app reminds you of the winter-tyre obligation (15 Nov – 15 Apr in Italy). On 1 April it reminds you of the reverse swap. Skipped silently when the mounted set is already seasonally correct.
🚗 Trip logger (GPS)
Works without OBD. Start a trip with a tap, or enable automatic recording in the vehicle settings: the app detects your car's Bluetooth, starts recording when you drive off and stops when you park.
- Route map (OpenStreetMap)
- Distance, duration, average and max speed
- Eco score 0–100: harsh accel/brake events, idling time
- Share: tap 📤 on a trip card → generates a 1080×1920 Instagram-story-style PNG with route + numbers
Smooth camera: the navigation map follows the vehicle at 60–120 Hz like a real GPS navigator. The vehicle marker auto-orients toward the direction of travel.
🛠️ OBD adapter (optional)
Only needed if you want to read check-engine codes, RPM, engine temperature.
Compatible adapters
- ✅ ELM327 (Bluetooth Classic — even budget clones from €10)
- ✅ ELM327 Mini (BLE)
- ✅ STN1110 / STN2120 (OBDLink MX+/CX — top of the line)
- ✅ Vgate iCar Pro, BAFX, Veepeak (BLE), Konnwei
- ✅ Wi-Fi adapters (enter IP and port — default 192.168.0.10:35000)
NOT compatible: USB adapters and proprietary diagnostic tools.
Pairing
- Plug the adapter into the OBD-II port (usually below the steering column)
- Open the app → vehicle settings → Setup wizard
- The app scans nearby Bluetooth devices — pick yours
- VIN auto-switch: if you have multiple vehicles and the adapter reports a known VIN, the app switches to the right profile automatically
Supported vehicles
- 🇪🇺 Europe: gasoline from 2001, diesel from 2004
- 🇺🇸 USA: all vehicles from 1996
- 🌏 Asia: most vehicles from 2005
Manufacturer-specific data (TPMS, door status, etc.) is not exposed by the standard OBD-II protocol.
📊 Analytics and backup
After a few refuels and trips, the Analytics section shows:
- Total cost of ownership (TCO) per year
- Monthly spend breakdown (fuel / maintenance / deadlines)
- Year-end projection
- Comparison with your other vehicles (if you own more than one)
Backup: Settings → Auto-backup. Pick a folder (Google Drive, Documents, microSD). The app saves a full ZIP (database + attachments + settings) at your chosen cadence (daily, weekly, monthly).
Restore: Settings → Import backup ZIP. The app restarts after restore to re-align with the new database.
❓ Frequently asked questions
- The adapter won't connect
- Pair the adapter at system level first (Settings → Bluetooth). Some Chinese ELM327 require PIN 1234 or 0000. Turn ignition off and on again to reset the CAN bus.
- My Eco score is low even when I drive gently
- The score penalises idle time (long traffic lights). If you drive in city traffic, scores around 70–80 are normal. Harsh accel/brake counts are normalised per 100 km so a long trip doesn't get an automatic discount.
- The map stutters during a trip
- Check that GPS is on High Accuracy (Settings → Location). At low speed (<5 km/h) the GPS provider stops reporting bearing — it's a physical limit of the sensor, not the app.
- How do I change the app language?
- Settings → Language → pick any of the 24 European languages (English, Italiano, Deutsch, Español, Français, Português, Polski, Nederlands, Ελληνικά, Svenska, Dansk, Suomi, Čeština, Magyar, Română, Български, Hrvatski, Slovenčina, Slovenščina, Eesti, Latviešu, Lietuvių, Gaeilge, Malti). The change is instant.
- I deleted a refuel by accident
- Tap 🗑️ → the "Refuel deleted" snackbar gives you 5 seconds to undo (tap Undo).